DeLonghi Electric Heater Delonghi Ceramic Fan Heater User Manual

0

Out of 0 Ratings

Owner's of the DeLonghi Electric Heater Delonghi Ceramic Fan Heater gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 7
 
4
ELECTRICAL CONNECTION
Before connecting the plug to the power
outlet, make sure that the voltage of your elec-
trical system corresponds to the voltage
shown on the appliance rating label and the
outlet you are going to use is in good condi-
tion.
INSTALLATION
The appliance may be used on any rigid hori-
zontal surface. Do not overload the electrical
circuit; avoid using the same outlet for multi-
ple appliances.
OPERATION AND USE
1. Connect the appliance to the power outlet.
2. The appliance emits a beep and the power
indicator light (H) comes on and remains
on as long as the appliance is powered.
3. The appliance goes into OFF. If the display
show a blinking dot, it means that the tip
over switch has been activated.
See paragraph: “Additional safety featu-
res” page 6.
4. Press the ON/OFF button (A) to turn on the
appliance. It will begin to heat with the
predefined settings.
5. Press the MODE button (F) to select one
of the following functions available:
Ventilation ( ) Anti-freeze ( )
Heating at minimum power (1) Heating
at maximum power/BOOST function (2)
5.1 Ventilation ( )
In this operating mode only the fan
operates, so the appliance does not
heat the room.
5.2 Anti-freeze ( )
In this operating mode the appliance
keeps the room at a temperature of
45°F (7°C) to prevent freezing tempe-
ratures.
5.3 Heating 1 and Heating 2
In this operating mode you can set the
desired temperature by pressing the +
and - adjustment buttons (B).
Heating 1 (minimum power level):
The appliance operates at the mini-
mum power reducing energy con-
sumption to the minimum.
Heating 2/BOOST function (maximum
power level):
The appliance operates at the maximum
power for rapid heating of the room.
SAVE THESE INSTRUCTIONS
For Household use only
agent, or a licensed and qualified pro-
fessional.
19.Do not use this appliance with an
extension cord or outlet strip. Connect
the appliance directly to a suitable
outlet.
20. Make sure that the plug is fully inser-
ted into the outlet. Wall outlets may
deteriorate with time, so check the
plug periodically for signs of overhea-
ting or deformation. If the outlet has
deteriorated, stop using it and have it
repaired.
21.Check that neither the appliance nor
the power cord have been damaged
during shipping.
22.Make sure that no styrofoam or other
packing materials remain in the applian-
ce.
23.The first time the appliance is used, run
it at the maximum power for at least
two hours. During this time, ventilate
the room thoroughly to eliminate the
“new” smell released by the appliance.
It is completely normal for the applian-
ce to emit “creaking” sounds the first
time it is run.
24. CAUTION: To prevent electric shock,
make sure the wide prong of the plug is
inserted in the wide slot of the outlet.
25.Do not place the heater near a bed
because objects such as pillows or
blankets can fall off the bed and be
ignited by the heater.
26.Extreme caution is necessary whenever
the heater is left operating unattended.
27.Do not open the appliance. No user-
serviceable parts inside.

   Find Your Products By Category