0

Out of 0 Ratings

Owner's of the APC Network Card Network Management Card gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 24
 
Installation and Quick-Start Manual 7
Installation in a UPS
Step 2: Install
the Network
Management
Card
If you are installing the Management Card in a Symmetra UPS
that uses more than one
APC management product, see
Installation of Multiple Management Cards, a copy of which
came with the Management Card. You must install the APC
management products in the correct order for them to operate
properly.
1. Use the same screws that hold the slot cover in place to
secure the Management Card in the
UPS card slot.
2. Connect a network interface cable to the 10/100Base-T
network connector on the Management Card.
3. Reconnect the
UPS to its input power source.
4. Turn on the
UPS.
5. See Quick Configuration on page 10.
Caution
The Network Management Card is sensitive to
static electricity. When handling the
Management Card, touch only the end plate
while using one or more of these electrostatic-
discharge devices (ESDs): wrist straps, heel
straps, toe straps, or conductive shoes.
ModemModemProbe