4.0

Out of 2 Ratings

Owner's of the Dual Car Stereo System Dual Car Stereo System gave it a score of 4.0 out of 5. Here's how the scores stacked up:
  • Reliability

    4.0 out of 5
  • Durability

    4.0 out of 5
  • Maintenance

    4.0 out of 5
  • Performance

    4.0 out of 5
  • Ease of Use

    4.0 out of 5
of 24
 
15
DCBT304U OPERATION
Bluetooth
®
 Operation
MostBluetoothdevicessupporttheauto-connectfeature,andwillconnectautomatically
ifthedeviceisinrangewhentheDCBT304Uispowered-on.Ifyourdevicewaspreviously
pairedbutdoesnotconnect,usetheseinstructionsbelow.Somedevicesrequire
authorizationtoallowtheautoconnectfeature.
•IfyourmostrecentlyconnectedBluetoothdevicebecomesdisconnectedordoesnot
reconnect,press fromBluetoothmodetoreconnectyourmobiledevice.
•Toconnectapreviouslypaireddevicethatwasnotrecentlyconnected:
1)Ifapplicable,pressandhold todisconnectanyconnectedmobiledevices.
2)FromBluetoothmode,pressSELECT."PairedDevices"willappearontheLCD.
3)Turnthevolume knob tocyclethroughthelistofdevices.
4)PressSELECT or toconnecttothedesireddevice.Itmustbeinrangetoconnect.
Note:IftheAuto ConnectsetupmenusettingissettoOFF,youmustpress toconnect
youdeviceafterpairing,andeachtimetheDCBT304Uispowered-on.
Pressandhold for3secondstodisconnectaconnecteddevice.Thedevicewillremain
pairedandappearinthePAIREDDEVICESmenu,butnotbeconnected.
BeforeyoucanuseaBluetoothdevice,itmustbepairedand
connected.MakesurethatBluetoothisactivatedonyour
devicebeforeyoubeginthepairingprocess.
TheDCBT304Ubroadcaststhepairingsignalconstantly
whennodevicesarecurrentlyconnected.Completethe
pairingsequencefromyourBluetoothdevice.Refertothe
owner'smanualforyourdeviceformoredetails.
The device name is "DUAL BT"  
The Bluetooth passcode "1234" 
Note:TheDCBT304Ucanbeinanymodeofoperationwhen
pairingisperformed.
Ifadeviceiscurrentlyconnected,pressandhold to
disconnectthecurrentdevicebeforeanewdevicecanbe
paired.Thenbeginthepairingsequencefromthenew
Bluetoothdevice.
Preparation
Pairing a New Device
Pairing Additional Devices
Pairing a Device
(Re)Connecting a Paired Device
Disconnecting a Device