3.6

Out of 18 Ratings

Owner's of the Dual Car Stereo System XD1228 gave it a score of 3.6 out of 5. Here's how the scores stacked up:
  • Reliability

    3.9 out of 5
  • Durability

    3.59 out of 5
  • Maintenance

    3.67 out of 5
  • Performance

    3.56 out of 5
  • Ease of Use

    3.35 out of 5
of 12
 
5
XD1228 OPERATION
General Operation
Press RELEASEandpullawayfromtheleftsidetoremove.
Tore-install,insertrightsideoffaceplatefirstthenpushleft
side to secure.
Removetrimringandinstallsupplied#1x7/32”Phillips
headscrewthroughleftsideofmountingframeinto
faceplate.
Press
toturntheuniton.InsertingaCDwillturntheunit
onautomatically.Pressandholdforthreeseconds
to
turntheunitoff.
Press MODEtoselectbetweenAM/FM,CDorauxiliary
input.Modesofoperationareindicatedinthedisplay.
Inserta3.5mmconnectorinthefrontpanelAUXport.
Connecttheotherendofthe3.5mmconnectortothe
headphoneoutputofanaudiodevice,MP3player,etc.Press
MODEtoselectAUXmode.
Adjustvolumeusingthe volume knob(00-46).
Theradiofrequency(tunermode)andCDtrack/elapsed
time(CDplayermode)willbeshownbydefault.Press
DISPtodisplaytheclock,andpressDISPagaintoreturnto
defaultdisplay.
PressandholdDISPfor2seconds,theclockwillbeginto
flash.PressTRACK
nn
toadjustthehoursandTRACK 
ll
toadjusttheminutes.PressDISPorwait5secondsto
savetheclocksettings.
Theclockwilldisplay12-hourAM/PMtimeinUSA
frequencyspacingmode(PM10:00).InEuropeanfrequency
spacingmode,theclockwilldisplay24-hourtime(22:00).
Pressandholdformorethan2secondstoRESETtheunit
uponinitialinstallation.TheRESETbuttonislocatedbehind
thefaceplate.
Faceplate Removal
Semi-permanent 
Faceplate Installation
Power On/Off
Mode
Auxiliary Input
Volume
Display
Set the Clock
12/24-hour Clock 
Reset