3.5

Out of 2 Ratings

Owner's of the Dual Car Stereo System Dual Car Stereo System gave it a score of 3.5 out of 5. Here's how the scores stacked up:
  • Reliability

    3.5 out of 5
  • Durability

    3.5 out of 5
  • Maintenance

    3.5 out of 5
  • Performance

    4.0 out of 5
  • Ease of Use

    3.0 out of 5
of 32
 
24
XDMA550BT OPERATION
Bluetooth
®
 Operation
MostBluetoothdevicessupporttheauto-connectfeature,andwillconnectautomaticallyif
thedeviceisinrangewhentheXDMA550BTispowered-on.Ifyourdevicewaspreviously
pairedbutdoesnotconnect,usetheseinstructionsbelow.Somedevicesrequire
authorizationtoallowtheautoconnectfeature.
•IfyourmostrecentlyconnectedBluetoothdevicebecomesdisconnectedordoesnot
reconnect,press
fromBluetoothmodetoreconnectyourmobiledevice.
•Toconnectapreviouslypaireddevicethatwasnotrecentlyconnected:
1)Ifapplicable,pressandhold todisconnectanyconnectedmobiledevices.
2)FromBluetoothmode,pressSELECT."PairedDevices"willappearontheLCD.
3)Turnthevolume knob tocyclethroughthelistofdevices.
4)PressSELECT or toconnecttothedesireddevice.Itmustbeinrangetoconnect.
Note:IftheAuto ConnectsetupmenusettingissettoOFF,youmustpress toconnect
youdeviceafterpairing,andeachtimetheXDMA550BTispowered-on.
Pressandhold
for3secondstodisconnectaconnecteddevice.Thedevicewillremain
pairedandappearinthePAIREDDEVICESmenu,butnotbeconnected.
BeforeyoucanuseaBluetoothdevice,itmustbepairedand
connected.MakesurethatBluetoothisactivatedonyour
devicebeforeyoubeginthepairingprocess.
TheXDMA550BTbroadcaststhepairingsignalconstantly
whennodevicesarecurrentlyconnected.Completethe
pairingsequencefromyourBluetoothdevice.Refertothe
owner'smanualforyourdeviceformoredetails.
The device name is "DUAL BT"  
The Bluetooth passcode "1234" 
Note:TheXDMA550BTcanbeinanymodeofoperation
whenpairingisperformed.
Ifadeviceiscurrentlyconnected,pressandhold to
disconnectthecurrentdevicebeforeanewdevicecanbe
paired.Thenbeginthepairingsequencefromthenew
Bluetoothdevice.
Preparation
Pairing a New Device
Pairing Additional Devices
Pairing a Device
(Re)Connecting a Paired Device
Disconnecting a Device