GoPro Camcorder Black User Manual

0

Out of 0 Ratings

Owner's of the GoPro Camcorder Black gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 44
 
82 83
/ Using the Mounts
MOUNTING GUIDELINES
Follow these guidelines when attaching mounts:
• Attach the adhesive mounts at least 24 hours prior to use.
Allow 72 hours for complete adhesion.
• Adhesive mounts must be mounted only on smooth surfaces.
Porous or textured surfaces do not enable a proper bond. When
applying the mount, firmly press it into place and ensure full
contact over the entire surface.
• Apply adhesive mounts to clean surfaces only. Wax, oil, dirt or
other debris reduce adhesion, which can result in a weak bond
and risk of losing the camera should the connection fail.
• Attach adhesive mounts in room temperature conditions.
Mount adhesives do not bond properly if applied in cold or damp
environments to cold or damp surfaces, or if the surface is not
room temperature.
For more information on mounts, visit gopro.com/support.
WARNING: If using your camera with a GoPro helmet mount or
strap, always select a helmet that meets the applicable safety
standard. Choose the right helmet for your particular sport or
activity and make sure that it is the right fit and size for you.
Inspect your helmet to ensure that it is in good condition and
follow the helmet manufacturer’s instructions on safe helmet
use. Any helmet that has sustained a major impact should be
replaced. No helmet can protect against injury in every accident.
/ Using the Mounts
LOCKING PLUG
If you are using the HERO4 Black in high-impact sports such as
surfing or skiing where significant impact might occur, use the locking
plug to securely lock the Quick Release Buckle fingers into place. The
locking plug helps to prevent the housing from accidentally releasing
from the mount.
To Attach the Locking Plug:
1. Loop the circular ring over the thumbscrew. The circular ring
acts as a leash to prevent dropping or losing the locking plug.
2. Slide the Quick Release Buckle into the mount until it clicks
into place.
3. Press the U-shaped part of the plug into the U-shaped space in
the Quick Release Buckle.
WARNING: To avoid injury in the event of an accident, do not use
the locking plug or tether when using a mounting device on a
helmet or other personal protective gear.

   Find Your Products By Category