0

Out of 0 Ratings

Owner's of the Panasonic Camcorder HCX920K gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 120
 
- 49 -
Switch the quality and recording format of the motion picture to record in AVCHD.
Set [REC FORMAT] to [AVCHD].
/
/
*1 This option allows you to record in 1080/60p (1920k1080/60 progressive), which is the highest
picture quality for this unit.
*2 Recording will have higher quality in the order of [HA], [HG] and [HE].
Recordable time using the battery (l 14)
This function’s default setting is [HG] mode.
Please refer to page 118 about approximate recordable time.
When the unit is moved a lot or moved quickly, or when a fast-moving subject is recorded
(Especially when recording in recording format [MP4] or recording mode [HE]), mosaic-type noise
may appear at playback.
It is possible to continuously record motion picture to an SD card when there is no space available
in the built-in memory. (It allows you to record only to SD card from built-in memory.)
Set [MEDIA SELECT] to [Built-inMemory].
Set [REC FORMAT] to [AVCHD].
Insert an SD card.
is displayed on the screen. will disappear when space in the built-in memory is gone
and the recording to the SD card starts.
Relay Recording can only be performed once.
Combine the scenes that were relay-recorded using the [RELAY SCENE COMBINE] into
the SD card. (l 69, 76)
Once you have performed [RELAY SCENE COMBINE], you can use the Relay Recording
function again. If the [RELAY REC] is set to [ON] without performing the [RELAY SCENE
COMBINE], a message is displayed. You will be able to perform Relay Recording by selecting
[YES], but you will not be able to perform the [RELAY SCENE COMBINE] after that.
[REC MODE]
: [RECORD SETUP] # [REC MODE] # desired setting
[1080/60p]
*1
: Set the recording mode to 1080/60p.
[HA]/[HG]/[HE]
*2
: Set the recording mode to 1080/60i.
[HA]/[HG]/[HE]
*2
: Set the recording mode to 1080/60i.
[RELAY REC]
: [RECORD SETUP] # [RELAY REC] # [ON]