Panasonic Home Theater System Home Theater Audio System User Manual

0

Out of 0 Ratings

Owner's of the Panasonic Home Theater System Home Theater Audio System gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 16
 
5
RQT9861
Preparing the remote control
Before using
Remove the insulation sheet before you use the remote
control for the first time.
Replacing the battery
Replace the remote control battery when it stops
operating or when the range is decreased. Replace with
a new battery (CR2025 lithium battery) only.
1 While pressing the stopper, pull out the battery
holder.
2 Insert a new battery with the (+) side facing up.
3 Push the battery holder back fully.
Placement
When the TV is less than 30 kg, and the pedestal of the
TV is within 460 mm (width) by 280 mm (depth), you can
put the TV on top of the system.
Otherwise, put the system at the side of the TV (right
side) or in a rack.
Note:
• Do not put the system in a metal cabinet.
• If irregular colouring occurs on the TV, switch off the TV
for 30 minutes. If the demagnetising of the TV does not
correct the problem, increase the distance between
this system and the TV.
• Keep magnetised items away. Magnetised cards,
watches, etc., can be damaged if put too near to the
system.
CAUTION!
Keep the button-type battery out of reach of children to
prevent swallowing.
Insulation
sheet
CAUTION!
• Keep the TV within the surface of the system. Be
careful not to tip over the TV as it can cause injury.
• Install the anti-tip device for your TV. For installation
details, refer to the operating instruction for the TV. If
your TV does not come with an anti-tip device,
consult your dealer.
• Moving the TV on the surface of the system can
scratch the surface of the system. Lift the TV when
you need to move it.
460 mm
280 mm

   Find Your Products By Category