Pioneer GPS Receiver Multimedia Navigation Receiver User Manual

0

Out of 0 Ratings

Owner's of the Pioneer GPS Receiver Multimedia Navigation Receiver gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 56
 
Connecting the power cord (1)
Yellow
To terminal supplied with power regardless of
ignition switch position.
Red
To electric terminal controlled by ignition
switch (12 V DC) ON/OFF.
Orange/white
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
With a two-speaker system, do not connect anything
to the speaker leads that are not connected to
speakers.
When a subwoofer is connected to this navigation
system instead of a rear speaker, change the rear
output setting in the initial setting. (Refer to
Operation Manual.) The subwoofer output of this
navigation system is monaural.
Note
White
Gray
Front speakerFront speaker
White/black Gray/black
Left Right
Rear speaker or
subwoofer (4
Ω
)
Rear speaker or
subwoofer (4
Ω
)
Green
Violet
Green/black
Violet/black
Green
Violet
When using a subwoofer of 70 W (2
Ω
), be sure to connect with violet and violet/black leads of this
navigation system. Do not connect anything with green and green/black leads.
Green/black
Violet/black
Not used.
Subwoofer (4
Ω
)
2
<CRD4697-A/N>10
En
10
Section
02
Connecting the system

   Find Your Products By Category