RCA Universal Remote RCU403 User Manual

4.2

Out of 23 Ratings

Owner's of the RCA Universal Remote RCU403 gave it a score of 4.2 out of 5. Here's how the scores stacked up:

  • Reliability

    4.0 out of 5

  • Durability

    4.13 out of 5

  • Maintenance

    4.05 out of 5

  • Performance

    4.43 out of 5

  • Ease of Use

    4.43 out of 5
of 32
 
12
RCU800
If you used one of the Code Search methods to program your remote, follow the steps below to find
out which code is compatible with your component. Finding the actual code and writing it down will
save you time if you ever need to program the remote again (e.g., if programming is lost when you
change the batteries).
Code Retrieval
1. Press and hold the CODE SEARCH key until the indicator
light illuminates. Then release the CODE SEARCH key.
2. Press and release the component key that matches the
component’s code you are retrieving (TV, VCR, DVD,
DBS•SAT, CABLE, AUDIO). For an auxiliary component,
press the AUX key, then the corresponding component key.
For CD, press the AUX key, then the DVD key. The indicator
light blinks once and then remains lit.
3. Press and release the CODE SEARCH key. The indicator
light turns off.
4. Starting with 0 on the keypad, press the number keys
in order (0-9) until the indicator light blinks.
5. The number that causes the indicator light to blink
is the first digit of your code.
6. Repeat step 4 until you have retrieved all three numbers
of the code.
7. Refer to the code box to write down the code for your
component within the Direct Entry section (page 5-10)
for the component just programmed.
The Sleep feature turns off your TV automatically at a duration you choose from 1 to 99 minutes.
To program your remote to control the Sleep feature, follow these steps:
Sleep Feature
Programming the Sleep Timer
1. Press and hold the SLEEP key until the indicator light
illuminates. Release the SLEEP key.
2. Enter time in minutes using the numerical keypad. The
indicator light should turn off. (Minute 1 thru 9: press 0
before the actual number. Maximum: 99 minutes).
3. Leave remote aimed at television. (IMPORTANT: The Sleep
feature will not work unless remote is left aimed at television.)
Canceling the Sleep Timer
The Sleep Timer program can be cancelled and reset to zero
by either of the following:
1. Press and hold the SLEEP key until the indicator light blinks.
OR
2. Press the ON•OFF key, turning the TV off.
(BLINK)
(OFF)
CODE
SEARCH
INDICATOR
LIGHT
INDICATOR
LIGHT
ON•OFF
SLEEP
CODE
SEARCH
SLEEP
(BLINK)
RCU800B_IB_REVB.qx4 2/11/04 13:05 Page 12

   Find Your Products By Category