4.2

Out of 1 Ratings

Owner's of the Sony Speaker System Sony LBT-GPX55 1600W Mini System with Bluetooth gave it a score of 4.2 out of 5. Here's how the scores stacked up:
  • Reliability

    4.0 out of 5
  • Durability

    4.0 out of 5
  • Maintenance

    4.0 out of 5
  • Performance

    5.0 out of 5
  • Ease of Use

    4.0 out of 5
of 44
 
model name [LBT-GPX77/GPX55/MHC-GPX88/GPX77/GPX55/GPX33]
[4-449-052-13(1)] GB
23
GB
filename[D:\MASNI JOB
FOLDER\SO130010\GB\4449052131\4449052131\06BAS.fm]
masterpage:Right
Bluetooth
The BLUETOOTH indicator lights up or
flashes in blue to show the Bluetooth
status.
Pairing is an operation where Bluetooth
devices register with each other
beforehand. Once a pairing operation is
performed, it does not need to be
performed again. If your device is an
NFC-compatible smartphone, the manual
pairing procedure is not necessary.
1 Place the Bluetooth device
within 1 meter (3 feet) from the
system.
2 Press BLUETOOTH on the unit
to select Bluetooth function.
“BLUETOOTH” appears in the
display panel.
Note
If the system is connected to a Bluetooth
device, press BLUETOOTH to disconnect
the Bluetooth device.
3 Hold down BLUETOOTH on the
unit for 2 seconds or more.
“PAIRING” flashes in the display
panel.
4 Perform the pairing procedure
on the Bluetooth device.
For details, refer to the operating
instructions of your Bluetooth device.
5 Select the model number of the
unit on the display of the
Bluetooth device.
For example, select “SONY
MHC-GPX88” (or LBT-GPX77/
GPX55/MHC-GPX77/GPX55/
GPX33).
If passkey is required on the Bluetooth
device, enter “0000”.
6 Perform the Bluetooth
connection on the Bluetooth
device.
When pairing is completed and the
Bluetooth connection is established,
Bluetooth device name appears in the
display panel.
Depending on the Bluetooth device,
connection may start automatically
after pairing is completed.
You can check the Bluetooth device
address by pressing DISPLAY
repeatedly.
Notes
You can pair up to 9 Bluetooth devices. If the
10th Bluetooth device is paired, the least
recently connected device will be replaced by
the new one.
“Passkey” may be called “Passcode”, “PIN
code”, “PIN number” or “Password”, etc.,
depending on the device.
The pairing standby status of the system is
canceled after about 5 minutes. If pairing is
not successful, repeat from step 1.
While connected to a Bluetooth device, this
system cannot be detected and connection
cannot be established from another Bluetooth
device which is never paired before.
If you want to pair with another Bluetooth
device, repeat steps 1 to 6.
About the BLUETOOTH
indicator
System status Indicator status
Bluetooth standby Flashes slowly
Bluetooth pairing Flashes quickly
Bluetooth connecting Flashes
Bluetooth connection
is established
Lights up
Pairing this system with a
Bluetooth device