3.0

Out of 11 Ratings

Owner's of the AT&T Telephone 1070 gave it a score of 3.0 out of 5. Here's how the scores stacked up:
  • Reliability

    3.09 out of 5
  • Durability

    2.91 out of 5
  • Maintenance

    3.09 out of 5
  • Performance

    2.91 out of 5
  • Ease of Use

    2.91 out of 5
of 104
 
10
Table/desktop installation
Connect the two long telephone line cords to the telephone. How
you connect the telephone line cords to the wall is determined by your
telephone service. Determine if you have one or two-line telephone wall
jacks and if you receive DSL (digital subscriber line) service. If one or more
of the telephone lines has DSL service, see Important information for DSL
users, pages 6-8. Use only the line cords that come with the phones. If you
need additional cords, visit our website at www.telephones.att.com
or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
If you have two-line wall jacks, you can just plug the line cords into the
wall jacks. Use Illustration A on page 11.
If you have one-line wall jacks, you need to purchase one or two two-
line adapters. Adapters are available at retail stores, by visiting our
website at www.telephones.att.com or by calling
1 (800) 222–3111. In Canada, call 1 (866) 288-4268.
You need two adapters if you have four telephone lines and use
the AUX jacks (on the back of the telephone) for equipment like fax
machines. You will also need an additional short 2- or 4- conductor
telephone line cord for this installation. Use Illustration B on page 11.
You need one adapter if you use both AUX jacks for installing your
phones. Use Illustration C on page 12.
NOTE: To purchase 2-line adapters (model 16598, part # 89-0071-00),
you can visit our website at www.telephones.att.com or call
1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. You can
purchase 2-line adapters at some electronic and hardware stores.
1.