INSTEON Home Security System INSTEON Home Security System User Manual

0

Out of 0 Ratings

Owner's of the INSTEON Home Security System INSTEON Home Security System gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 4
 
2452-222/2452-422/2452-522 Rev. 11/6/2012 1:27 PM / See Owner’s Manual for Warranty Information.
Protected under U.S. and foreign patents (see www.insteon.com)
© Copyright 2012 INSTEON, 16542 Millikan Ave., Irvine, CA 92606, 800-762-7845
Detecting Area
Placement Tips
Select a location that will provide the coverage required while keeping in mind the following potential problems:
• Reflective surfaces - Do not aim the detector at reflective surfaces such as mirrors or windows as this may distort the
coverage pattern or reflect sunlight directly onto the detector
• Air flow - Avoid locations that are subject to direct high air flow such as near an air duct outlet
• Moisture - Do not place the detector near sources of steam or oil
• Sunlight - Do not aim the detector such that it will receive direct or reflected (mirror) sunlight
• Obstruction - Do not limit the coverage with large objects within the detection area such as plants or filing cabinets
• Pet rejection - Do not aim the detector at a stairway which a pet has access to and do not place furniture or objects higher
than 3 ft./0.9 m, which a pet can climb onto (e.g. a cat on a couch), closer than 6 ft./1.8 m to the detector
• Fireplace - Do not place the detector near a fireplace due to the light and heat
• Snow or ice – Snow or ice on the Fresnel lens may interfere with Motion Sensor’s ability to detect motion
• Dirt – Dirt on the Fresnel lens may interfere with Motion Sensor’s ability to detect motion
Mount Sensor
1) Use the two small screws (included) to secure the swivel mounting bracket at your desired location
2) Slide Motion Sensor onto the swivel mounting bracket (sliding the unit to the right) until you hear a click
3) Aim Motion Sensor towards the area in which you wish to detect motion
4) Test by walking through the area. Responder(s) should respond appropriately when motion is sensed and turn off 30 seconds
after last motion sensed.

   Find Your Products By Category