0

Out of 0 Ratings

Owner's of the INSTEON Marine Lighting INSTEON Marine Lighting gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 9
 
Page 7 of 9 2843-222/2843-422/2843-522 - Rev: 1/21/2014 7:18:39 AM
Normally open when door/window is closed, sensor will show open. When door/window is open, sensor will
show closed
Normally closed when door/window is closed, sensor will show closed. When door/window is open, sensor
will show open
Using Internal Reed Switch and External Sensors
When Open/Close Sensor external sensors input is used in conjunction with its internal reed switch, Open/Close
Sensor behaves much like several sensors connected in parallel (above), meaning:
Open/Close Sensor will be open when both internal reed switch and external reed switch sensor terminals
show open
Open/Close Sensor will be closed when either internal reed switch or external sensor terminals show closed
Power Restore
Open/Close Sensor stores all of its settings, such as links to other INSTEON devices, with non-volatile memory.
Because settings are saved in non-volatile memory, they will not be lost when the battery is removed.
Factory Reset
All settings and scenes will be erased and return to factory default settings.
1) If you are using Open/Close Sensor to control any responders, unlink them from Open/Close Sensor. See
Remove Open/Close Sensor as a Controller.
2) Use a small screwdriver to gently remove Open/Close Sensor main case
3) Remove battery and wait at least 15 seconds
4) Press and hold set button on Open/Close Sensor while reinstalling battery
5) Release set button when the status LED turns on
Open/Close Sensor status LED will stay on for about 4 seconds and then turn off
Specifications
General
Product name INSTEON Open/Close Sensor (formerly #2421, TriggerLinc)
Brand/manufacturer INSTEON
Manufacturer product number
US 2843-222 (formerly #2421)
EU 2843-422
AUS/NZ 2843-522
UPC
US 718122388912
EU 813922013009
AUS/NZ
813922013016
Warranty 2 years, limited
Operation
Status LED Green. Blinks on activation
Operational Gap: 1/2" between magnet and main case
Sense Modes:
Jumper Installed: Open = Group 1 On, Closed = Group 1 Off
Jumper Uninstalled: Open = Group 1 On (or off), Closed = Group 2 On (or
Off)
Aux. Sensor Input: Senses contact closure
Aux. Sensor Input Wire: >= 20 gauge wire
Setup Memory: Non-volatile EEPROM
INSTEON