INSTEON Marine Lighting INSTEON Marine Lighting User Manual

0

Out of 0 Ratings

Owner's of the INSTEON Marine Lighting INSTEON Marine Lighting gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 9
 
Page 8 of 9 2843-222/2843-422/2843-522 - Rev: 1/21/2014 7:18:39 AM
INSTEON Addresses 1 hard-coded out of 16,777,216 possible
INSTEON controller Yes
INSTEON responder No
Maximum links/scenes 30
Software configurable Yes
RF range
Up to 150 feet (50 meters) open air*
*Range may vary due to local interference
INSTEON device category 0x10 (all frequencies)
INSTEON device subcategory
US
0x02
EU
0x06
AUS/NZ
0x07
Mechanical
Case color White
Set button Yes
Dimensions
Main Case: 3.46" x 1.32" x 0.76" (88mm x 34mm x 19mm)
Magnet: 2.28" x 0.55" x 0.43" (58mm x 14mm x 11mm)
Weight 3.5 oz (99g)
Operating environment Indoors
Operating temperature range 32° to 104° F (0° to 40° C)
Operating humidity range 0-85% relative humidity
Storage temperature range -4° o to 158° F (-20° to 70° C)
Electrical
RF Frequency
US 915 MHz
EU
869 MHz
AUS/NZ
921 MHz
Power: 1 AA Alkaline Battery (included)
Battery Life: 6 months (w/ 2 links @ 50 activations per day)
Certification: FCC & Industry Canada
X10
X10 Support N/A
Certification and Warranty
FCC and Industry Canada Compliance Statement
This device complies with FCC Rules Part 15 and Industry Canada RSS-210 (Rev. 7). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions
suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.
The digital circuitry of this device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio and television reception. However, there is no
guarantee that interference will not occur in a particular installation. If this device does cause such interference, which can be verified by turning the device off and on,
the user is encouraged to eliminate the interference by one or more of the following measures:
- Re-orient or relocate the receiving antenna of the device experiencing the interference
- Increase the distance between this device and the receiver
- Connect the device to an AC outlet on a circuit different from the one that supplies power to the receiver
- Consult the dealer or an experienced radio/TV technician

   Find Your Products By Category