4.0

Out of 12 Ratings

Owner's of the Panasonic Camcorder HCV550K gave it a score of 4.0 out of 5. Here's how the scores stacked up:
  • Reliability

    3.25 out of 5
  • Durability

    3.75 out of 5
  • Maintenance

    3.83 out of 5
  • Performance

    4.92 out of 5
  • Ease of Use

    4.25 out of 5
of 207
 
- 164 -
You can view and change this unit’s Device name (SSID), which is used for operating this unit as a
wireless access point.
1 Touch [INPUT], and enter the desired Device name (SSID).
Input up to 20 characters are recommended. All the characters cannot be confirmed when
displaying the Device names on this unit if a long Device name is used. (l 157)
For details on how to enter characters, refer to page 87.
2 Touch [EXIT].
If you are going to connect directly to a smartphone after changing the Device name (SSID), set
the connection again with the changed Device name (SSID). (l 157)
The Password entered during the setting of direct connection cannot be changed. (l 157)
You can change or check your wireless LAN’s network settings, such as the [IP Address], [Subnet
Mask] and [MAC Address].
If you touch [AUTO], the network settings are configured automatically. If you touch [MANUAL],
you can set each item. Select the item you want to set, and set it.
[MAC Address] cannot be changed.
You can test the connection between this unit and the wireless access point. The following
connections can be verified:
jConnection to the wireless access point
jConnection to “LUMIX CLUB”
jConnection to USTREAM
jConnection to the home monitor server
1 Touch [NEXT].
The connection test starts.
2 Check the connection test result, and touch [EXIT].
If the connection is successful, “±” is displayed. If the connection is not successful, “t” is
displayed.
To test the connection to “LUMIX CLUB” or USTREAM, you need to make other settings in
advance. (l 145, 165)
[Device Name]
[IP Address/DNS
Settings]
[IP Address]/[Subnet Mask]/[Gateway]/[Primary DNS]/[Secondary DNS]/[MAC Address]
[Connection Test]