Uniden Marine Radio UM380 User Manual

3.0

Out of 1 Ratings

Owner's of the Uniden Marine Radio UM380 gave it a score of 3.0 out of 5. Here's how the scores stacked up:

  • Reliability

    3.0 out of 5

  • Durability

    3.0 out of 5

  • Maintenance

    3.0 out of 5

  • Performance

    3.0 out of 5

  • Ease of Use

    3.0 out of 5
of 56
 
23
English
Calling a parcular group of staons (Group Call)
Group calling calls all the stations that share your group MMSI. You must have a group MMSI
programmed into the radio to make a group call, and the stations (boats) you are calling
must have this same group MMSI programmed into their radios.
1. Press
CALL-MENU
to display the call menu.
2. Select Group.
3. The radio prompts you to select a response channel. Use
CHANNEL UP
and
CHANNEL DOWN
to scroll through the available channels. When you reach the channel you want to use for
a response, press
ENT-1W/25W
.
4. The radio asks you to confirm the call. Select Send to continue with the call or select
Cancel to cancel the call.
5. The radio switches to channel 70 to transmit the call request then automatically switches
to the designated response channel.
Calling all staons (All-Ships Call)
All ships calling contacts all DSC radios within range of your boat. You should only use all
ships calling in the event of a Safety warning (such as debris in the water) or to request
assistance in an Urgency (any situation where your vessel has a serious problem but is not
yet in distress).
1. Open the call menu.
2. Select All Ships, and then choose whether this is an Urgency call or a Safety call.
3. The radio asks you to confirm the call. Select Send to continue with the call or select
Cancel to cancel the call.
4. The radio automatically switches to channel 70 to transmit the call request then
automatically switches to channel 16, the designated response channel for all-ships
calling.

If you have programmed your MMSI number, your radio can transmit an automated distress
call with your current location and nature of the distress. The radio then monitors the
channel 16 for a response and repeats the distress call every few minutes until it receives an
acknowledgement.
To send an automatic distress call, press and hold DISTRESS for three seconds. If
no MMSI number has been programmed, the radio prompts you to enter your MMSI
number.
If you want to include the nature of your distress in the distress call, use the following
distress procedure:
1. Press
DISTRESS
.
2. The radio displays the list of distress conditions; use
CHANNEL UP
and
CHANNEL DOWN
to
choose the nature of your distress, then press and hold
DISTRESS
for three seconds.
Undesignated Sinking Fire
Adrift Flooding Abandoning
Collision Piracy.Armed Grounding
Overboard Capsizing
UM380_20101221.indd 23 4/13/2011 11:25:12 AM

   Find Your Products By Category