Uniden Marine Radio UM380 User Manual

3.0

Out of 1 Ratings

Owner's of the Uniden Marine Radio UM380 gave it a score of 3.0 out of 5. Here's how the scores stacked up:

  • Reliability

    3.0 out of 5

  • Durability

    3.0 out of 5

  • Maintenance

    3.0 out of 5

  • Performance

    3.0 out of 5

  • Ease of Use

    3.0 out of 5
of 56
 
33
English
Follow the steps below to adjust the time:
1. Display the normal menu and choose the Setup sub-menu.
2. Select GPS Setup and then choose Time Adjust.
3. The display shows your current local time. To adjust the time forward one hour, use
CHANNEL UP
. To adjust the time back one hour, use
CHANNEL DOWN
button. Press
ENT-
1W/25W
button when you are finished.
4. The display prompts you to confirm the setting: choose Set to save the new time or
Cancel to exit time setup without saving. The radio returns to the GPS Setup menu.
5. If your local area observes Daylight Savings Time, choose Daylight Save and press the
ENT-1W/25W
button.
6. If Daylight Savings Time is currently in effect, select On. If Daylight Savings Time is not
currently in effect, select Off.
7. Press
ENT-1W/25W
. The radio activates the new time setting and returns to the GPS Setup
menu.

Your radio provides a standard NMEA0183 GPS output that you can connect to a
chartplotter. When it receives another boat’s position data in a DSC call, the radio sends the
position data to the chartplotter so you can see the location:
1. Connect the ORANGE wire of the accessory cable to the NEGATIVE (-) wire of your
chartplotter’s NMEA data INPUT.
2. Connect the YELLOW wire of the accessory cable to the POSITIVE (+) wire of your
chartplotter’s NMEA data INPUT
3. Be certain all wire connections are secure and that all open wires are adequately
covered.
#NOTE: To extend the life of the radio, use waterproof tape to seal electrical connections.

You can use an external speaker to monitor the radio from a different part of your boat or in
a noisy environment. If you adjust the
VOLUME-PWR
knob on the radio, it will also adjust the
external speaker volume.
Your radio supports an external speaker with the following specifications:
x Minimum impedance of 4 Ohms
x Minimum power handling of 10 Watts
1. Connect the BLACK wire of the accessory cable to the GROUND WIRE of your external
speaker.
Use the up and down arrows
to adjust the time by
one hour.
16
Back[CLR]
Select[ENT]
Time Adjust
09 : 14
Setup
Press and hold -
GPS Setup
Time Adjust
UM380_20101221.indd 33 4/13/2011 11:25:18 AM

   Find Your Products By Category