0

Out of 0 Ratings

Owner's of the Yamaha Stereo System Yamaha AM/FM Stereo Tuner gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 89
 
English
5 En
OPERATIONS
You can tune into stations easily by storing (presetting)
and recalling them. This function enables this unit to
preset up to 40 FM and AM stations.
To preset AM stations, see “Manual station preset” below.
1 Press FM/AM repeatedly to select the
reception band (FM).
2 Press and hold MEMORY for more than 3
seconds.
“Auto Preset” flashes on the front panel display. This
unit starts searching the stations with strong signals
and stores them automatically.
When automatic station preset is completed, this unit
tunes into the station preset to “01”.
Only FM stations with sufficient signal strength are stored
automatically. To store a station with weak signal strength, store
it manually. See “Manual station preset” below.
When you rerun “Automatic station preset”, all of the preset
data will be deleted and new preset data will be set to each
preset number.
If no station is found, the search ends and this unit returns to the
previous station tuned in before the search.
1 Tune into the desired FM/AM station.
See page 4 for tuning instructions.
2 Press MEMORY.
The preset station number flashes on the front panel
display for 5 seconds.
Perform the next operation within 5 seconds after pressing
MEMORY.
3 Turn PRESET/TUNING to select the desired
preset station number while the preset
station number flashes.
Perform the next operation within 5 seconds after selecting the
preset station number.
4 Press MEMORY again to confirm the preset.
When you preset a new station to an existing preset number,
new preset data will overwrite the existing preset data.
The reception mode (stereo or monaural) is stored along with
the station frequency.
Follow the steps below to clear a preset station one at a
time.
1 Select the desired preset station number.
See “Selecting preset stations” on page 4.
2 Press CLEAR.
The selected preset station number flashes on the
front panel display.
If you do not perform the next operation within 5
seconds, the clearing is canceled.
3 Press CLEAR to confirm.
“PresetXX Cleared” (XX indicates the preset
number) appears on the front panel display.
y
To clear all preset stations, press and hold CLEAR for 3 seconds.
“ALL CLEAR” appears on the front panel display.
PRESETTING STATIONS
Automatic station preset
(FM stations only)
Note
Notes
Manual station preset
Note
Auto Preset
CH__ FM100.05MHz
Note
Notes
Clearing the preset station
CH01 FM 99.80MHz
Preset station number
CH01 FM 99.80MHz
p CLEAR CH01[
Flashes