0

Out of 0 Ratings

Owner's of the ADTRAN Network Router Adtran Netvanta Modular Access Router gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 90
 
NetVanta 3200/3300/3400 Series Physical Descriptions
61200860L1-34AB Copyright © 2012 ADTRAN, Inc. 39
NetVanta 3458 Rear Panel Design
The NetVanta 3458 rear panel is shown below with a module installed. Appendix A on page 85 provides
pinouts.
Figure 15. NetVanta 3458 Rear Panel Layout
NetVanta 3458 Rear Panel Interfaces
SLOT 1/SLOT 2 NET/DBU Option Slots
The SLOT 1/SLOT 2 NET/DBU option slots support various NIM plug-in option modules. These
option modules are described in the section Option Modules on page 41.
PoE
The NetVanta 3458 has a 48 VDC port on the rear panel to provide the voltage required for PoE
applications. This port is active only if the NetVanta 3458 has been ordered with the PoE option. Note
that the NetVanta 3458 itself cannot be powered by this port.
8 Switch Port Interfaces
Ports 1 through 8 are RJ-45 connectors used to access the fully managed 10/100Base-T Ethernet
switch.
10/100Base-T Ethernet Interfaces
The Ethernet ports (ETH 0/1 and ETH 0/2) are RJ-45 connectors. These ports provide the following:
10Base-T or 100Base-T dual stacked connector
Auto-MDIX
Auto-negotiation
•CSMA/CD
IEEE 802.3 compatibility
Power Connection
All of the 1U-high products have universal power supplies and are shipped with the appropriate cable.
Please refer to Supplying Power to the Unit on page 69 for connection details.
PoE
SLOT 2 NET/DBU
SLOT 1 NET/DBU
ETH 0/2
ETH 0/1
1
2
3
4
5
6
7
8
SWITCH
48V