INSTEON Musical Toy Instrument INSTEON Musical Toy Instrument User Manual

0

Out of 0 Ratings

Owner's of the INSTEON Musical Toy Instrument INSTEON Musical Toy Instrument gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 24
 
Page 13 of 24 Rev: 7/25/2013 9:16 AM
4) Tap the scene button you want to change
5) Press and hold Keypad’s Set button until it beeps
The scene button’s LED
will begin blinking and Set button LED will blink green
All illuminated LEDs on Keypad will brighten to 100%
6) Press and hold Keypad’s Set button it beeps again
The button LEDs
will continue blinking and Set button LED will blink red
7) Press and hold Keypad’s Set button until it beeps a third time
The button LEDs
will stop blinking
The button function rotates to the next mode in the cycle: Toggle
→
Always Off
→
Always On
→
Toggle
8) Tap the button several times to confirm it is now in the desired state
9) If you wish to rotate button mode again, return to step 2
Adjust LED Brightness
Keypad’s LEDs can be set to any one of 32 brightness levels.
6-Button Configuration
1) Simultaneously tap the A and D buttons
Keypad will beep
2) Press and hold the On (brighter) and Off (dimmer) buttons to adjust LED brightness
3) When you have reached the desired brightness, simultaneously tap the A and D buttons again
Keypad will beep
8-Button Configuration
1) Simultaneously tap the C and F buttons
Keypad will beep
2) Press and hold the On button to adjust the LED brightness. (Each press and hold will toggle between
brightening and dimming)
3) When you have reached the desired brightness, simultaneously tap the C and F buttons
Keypad will beep
Turn Button Beep On or Off
The Keypad buttons can be set to Beep Mode so Keypad will beep every time a button is used. This feature is disabled
by default; to enable it, use home-management software such as HouseLinc or follow the steps below.
6-Button Configuration
1) Simultaneously tap the B and C buttons
Keypad will beep
Keypad’s beeper will toggle to on (if it was off) or off (if it was on)
8-Button Configuration
1) Simultaneously tap the D and E buttons
Keypad will beep
Keypad’s beeper will toggle to on (if it was off) or off (if it was on)
X10 Setup
Add X10 Address to a Button
1) Tap the Keypad scene button you want to add

   Find Your Products By Category