Out of 0 Ratings

Owner's of the Panasonic Security Camera Network Camera gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 220
11. Click “OK”.
When the browser is restarted after the certificate is imported, “Certificate Error” will not be displayed.
17.4 Configure the settings relating to DDNS [DDNS]
Click the [DDNS] tab on the “Network” page. (®page 42, page 44)
To access this camera via the Internet, it is necessary to configure the settings for the DDNS function.
When activating the DDNS function using the camera, either of the following DDNS services is available.
“Viewnetcam.com” service
Dynamic DNS Update (RFC2136 compliant)
Before using the DDNS service, it is necessary to perform the port forwarding setting for the router.
About Dynamic DNS Update (RFC2136 compliant)
Operation using DDNS services other than the “Viewnetcam.com” service is not guaranteed. We are
not responsible for any troubles or accidents on the circumstances where the camera is used arising
out of such services.
Refer to the DDNS service providers for the selection and configuration of the DDNS services other
than the “Viewnetcam.com” service.
“Viewnetcam.com” is a Dynamic DNS service designed for use with Panasonic Network Cameras.
Refer to the “Viewnetcam.com” website (http://www.viewnetcam.com/) for further information about
the service.
About DDNS services (IPv4/IPv6)
By using a DDNS service, it becomes possible to view camera images via the Internet.
The DDNS service associates dynamic global addresses and domain names.
It is possible to configure the settings for the “Viewnetcam.com” or Dynamic DNS Update (RFC2136 compliant).
In most of the DNS services offered by providers, global addresses are not static but dynamic. Therefore,
access to the camera via an old global address may be invalidated after a certain period of time. Either of the
following services is required when accessing a camera whose global address is not static via the Internet.
DDNS service (such as “Viewnetcam.com”)
It is possible to access via a registered and static domain name (example: *****.viewnetcam.com) even
after the global address is changed. Enrollment in a domain name service is required even when using the
IPv6 connection.
Refer to the “Viewnetcam.com” website (http://www.viewnetcam.com/) for further information about the
Static IP address service (such as a service offered by a contracted provider)
In this service, global addresses are static (not changed).
Operating Instructions 185
17 Configuring the network settings [Network]