16D-Link DAP-2553 User Manual
Section 3 - Conﬁguration
Home > Basic Settings
Access Point mode
Select Access Point from the pull-down menu.
The other three choices are WDS with AP,
WDS, and Wireless Client.
Service Set Identifier (SSID) is the name
designated for a specic wireless local area
network (WLAN). The SSID’s factory default
setting is dlink. The SSID can be easily changed
to connect to an existing wireless network or to
establish a new wireless network. The SSID can
be up to 32 characters and is case-sensitive.
Enable or Disable SSID visibility. Enabling this
feature broadcasts the SSID across the network,
thus making it visible to all network users.
Enabling this feature automatically selects
the channel that provides the best wireless
performance. Enable is set by default. The
channel selection process only occurs when the
AP is booting up.
All devices on the network must share the same channel. To change the channel, rst toggle the Auto Channel Selection
setting to Disable, and then use the pull-down menu to make the desired selection.
Note: The wireless adapters will automatically scan and match the wireless settings.
Select either 2.4 GHz or 5 GHz from the