D-Link Network Router AirPremier N User Manual

0

Out of 0 Ratings

Owner's of the D-Link Network Router AirPremier N gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 70
 
20D-Link DAP-2553 User Manual
Section 3 - Configuration
WDS mode
In WDS mode, the DAP-2553 wirelessly connects multiple
networks, without functioning as a wireless AP.
WDS is selected from the pull-down menu.
Service Set Identifier (SSID) is the name
designated for a specific wireless local area
network (WLAN). The SSID’s factory default
setting is dlink. The SSID can be easily changed
to connect to an existing wireless network or to
establish a new wireless network.
Enable or Disable SSID visibility. Enabling this
feature broadcasts the SSID across the network,
thus making it visible to all network users.
Enabling this feature automatically selects
the channel that will provide the best wireless
performance. This feature is not supported in
WDS mode.
All devices on the network must share the same
channel. To change the channel, use the pull-down
menu to make the desired selection.
Use the pull-down menu to choose 20 MHz or Auto 20/40 MHz.
Enter the MAC addresses of the APs on your network that will serve as bridges to wirelessly connect multiple networks.
Mode:
Network Name
(SSID):
SSID Visibility:
Auto Channel
Selection:
Channel:
Channel Width:
Remote AP MAC
Address:
Wireless Band:
Select either 2.4GHz or 5GHz from the pull-down
menu.

   Find Your Products By Category