Out of 0 Ratings

Owner's of the D-Link Network Router AirPremier N gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 70
18D-Link DAP-2553 User Manual
Section 3 - Configuration
WDS with AP mode
WDS with AP mode is selected from the pull-down
Service Set Identier (SSID) is the name designated for a
specic wireless local area network (WLAN). The SSID’s
factory default setting is dlink. The SSID can be easily
changed to connect to an existing wireless network or to
establish a new wireless network.
Enable or Disable SSID visibility. Enabling this feature
broadcasts the SSID across the network, thus making it
visible to all network users.
Enabling this feature automatically selects the channel
that will provide the best wireless performance. This
feature is not supported in WDS with AP mode. The
channel selection process only occurs when the AP is
booting up.
All devices on the network must share the same channel. To change the channel, use the pull-down menu to make the
desired selection. (Note: The wireless adapters will automatically scan and match the wireless settings.)
Allows you to select the channel width you would like to operate in. Select 20 MHz if you are not using any 802.11n
wireless clients. Auto 20/40 MHz allows you to connect to both 802.11n and 802.11b/g or 802.11a wireless devices on
your network.
Network Name
SSID Visibility:
Auto Channel
Channel Width:
Wireless Band:
In WDS with AP mode, the DAP-2553 wirelessly connects
multiple networks while still functioning as a wireless AP.
Select either 2.4GHz or 5GHz from the pull-down